Integral blinds: how blinds inside the glass work
An integral blind is a venetian blind sealed inside the double glazed unit itself, in the dry gap between the two panes. Nothing hangs in the room, nothing collects dust, and there is no cord for a child or a dog to find. They answer a specific set of problems well, and this is how they actually work.
The blind lives in the sealed unit.
The slats sit inside the cavity of the glass unit, which is sealed at manufacture the same way any double glazed unit is. Because the cavity is sealed and dry, the blind never gets dirty. Whatever the kitchen throws at the glass stays on the outside faces, which wipe clean like any window.
The unit fits standard frames, which is why integral blinds are most often specified in doors: French doors, patio sliders and the glazed panels beside a front door, where a normal blind would swing, catch and tangle every time the door moved.
How you operate them.
Control is either magnetic or electric. The magnetic version uses a slider on the face of the glass that couples through the pane to raise, lower and tilt the slats. The electric version does the same by motor, from a switch or remote, which suits glazing that is out of reach.
Both are chosen at the point of order along with slat colour and glass specification. This is a decision that has to be made before the unit is manufactured, because the blind cannot be added to an existing unit later.
Where they earn their money.
Doors are the honest answer. A blind inside the glass cannot swing or rattle when the door opens, which is the daily annoyance that kills ordinary blinds on French and patio doors. They also suit anywhere hygiene or dust matters, and rooms where a clean, bare window line is the look you are after.
For an ordinary bedroom window, curtains or a normal blind remain cheaper and give a wider choice of fabrics and blackout levels. We will say so when that is the better answer for the room.
What to check before ordering.
Decide the control type per door or window rather than per house, because reachability differs room to room. Pick the slat colour against the frame colour, not in isolation. And if you are replacing glazing anyway, price the integral blind at the same time; it is a manufacture-stage option, and the door only needs surveying once.
No more dusting slats?
Specify the blinds with the glazing, not after it.
Integral blinds are built into the unit at manufacture, so the right time to decide is while the doors or windows are being priced. We can talk through magnetic against electric at survey.
From the blog
Keep reading.
Sash windows in winter: draught-proofing heritage homes honestly
Original timber sashes are beautiful and cold. What draught-proofing genuinely achieves, and how modern uPVC sash windows keep the look without the winter.
Which rooms lose the most heat, and which windows to replace first
Few households replace every window at once. How to rank the rooms that leak the most heat, so a phased replacement spends the first pound well.
Condensation inside your windows every morning? Start here
Wet windows every morning from October is moisture meeting cold glass. The daily routine that stops most of it, and the two cases that need more.
Send an enquiry
Tell us what you are dealing with.
Describe the window, door or project and roughly where you are. Photos help, but they are not required. We will review the details and contact you about the next step.
- Repairs, replacements and new installations
- Based in Milton Keynes, with our own fitters
- Phone lines open 24/7 on 01908 429200